Elmo TNC-4614X Color CCD Day and Night Video Camera
List Price: $503.84

Our Price: $503.84

You Save:


Product Description

The Elmo TNC4614X Color CCD Day and Night Video Camera is a simple, reliable, and highly economical solution for most basic remote monitoring needs. Designed to provide a high resolution in a compact frame, the Elmo TNC4614X has a day/night function that works very well in low-light conditions, making it perfect for security surveillance or any other situation requiring 24-hour monitoring of an area such as a room, hallway, or production or retail space.

This camera utilizes a 0.33-inch color interline-transfer EXview HAD CCD (charge-coupled device) sensor, with 768-by-494 effective pixels. The TNC4614X has a high resolution of 480 horizontal TVL (TV lines), and achieves a S/N (signal-to-noise) ratio of 50 dB or better. The TNC4614X is very sensitive to light, recording in color by day and in black and white at night, with a minimum illumination of 0.1 Lux. The Elmo TNC4614X is NTSC compatible, and includes a standard CS lens mount and a VBS (video burst sync) composite video-out connector. This unit is can operate on either 24-volts AC or 12-volts DC power, and can operate in temperatures ranging from -10 to 50-degrees Celsius. The TNC4614X comes complete with features such as AGC (automatic gain control), backlight control, automatic and manual white balance, and a built-in automatic electronic shutter.

Technical Features:

  • S/N ratio: better than 50 dB
  • Sensitivity: minimum illumination of 0.1 Lux
  • Effective pixels: 768 by 494 pixels
  • Horizontal resolution: 480 TVL
  • Operating temperatures: -10 and 50-degrees Celsius
  • Dimensions: approximately 6 x 9 x 6 centimeters (W x D x H)
The Elmo TNC4614X camera is a reliable and high-quality addition to any budget-conscious surveillance system. Designed primarily for indoor use, this unit includes a line-lock/internal sync system. User's should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources.

About Surveillance Camera Technical Features
Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.

Elmo Day/Night TNC4614X DSP Color Camera.

  • 0.33-inch color interline-transfer Exview HAD CCD image sensor
  • High resolution of 480 horizontal TVL
  • Minimum illumination of 0.1 lux for low-light conditions
  • Features automatic gain control, white balance, and backlight control
  • Capable of using both 24VAC and 12VDC power