Weatherproof Ball Video Camera
  • Water resistant
  • Adjustable mount
  • Available in Black & White output This Weatherproof Ball Video Camera is encased in a sealed stylish 3.25" diameter ball housing with attached adjustable swivel base. Approved for outdoor or indoor use. Includes mounting hardware and a 12V DC power supply.

    Extend the cable on your new camera easily with this extension kit. Don't waste time soldering or crimping together your own cables or voiding the warranty by splicing in your own wires. Most cameras we carry only have a few feet of cable coming off the camera. This kit includes extensions for the power and the video signals. A coupler cable is included just in case the camera's output cable is the wrong gender! You will also need a BNC to RCA Adapter (7809RB1) to change the camera's video output connector from a BNC fitting to an RCA output. Now, it's easier than ever to mount your new camera just about anywhere you would like. Maximum distance with these cables extension kits is about 300 feet, beyond that you'll need thicker cable (RG-59) for the video signal and (18 awg) power, use # 8529D CCTV Combo Cable.



    Picture Output
    Black & White

    Image Pickup Device
    1/3" CCD

    Number of Pixels
    510h x 492v (251K Pixels)

    400 Lines

    Minimum Illumination
    .03 Lux

    4mm, 78 deg. field of view


    Cable Length
    56 Inches

    Video Output Connector
    Female BNC

    Mounting Bracket
    Included, Mounts on horizontal or vertical surfaces

    Power Requirements
    12 VDC at 125mA

    Power Supply
    12 VDC, 100ma adapter Included

    Operating Temperature
    -10F to 140F

    Dimensions (inches)
    3.25"w x 3.5"h x 3.67"d

    2 years (5 years if the warranty registration card is mailed to the manufacturer.)