Extra Receiver Works With 5.8GHz Wireless Unit to Control A/V Components Remotely

  • Receive crisp video and hi-fi stereo signals, even through walls
  • Long transmission range up to 300 feet clear line-of-sight
  • 5.8GHz band transmission won't have interference from cordless phones or wireless LANs

    If you have installed the 5.8GHz Wireless A/V Sender with I/R Extender (sold separately) to control your components remotely, you can expand this service with the 5.8GHz Extra Receiver. Attach this receiver to another television or monitor, and you'll be able to use your existing remote to manage a device connected to the transmitter in another room. And since it uses 5.8GHz-band signals, you'll avoid the interference associated with crowded lower-frequency band applications, such as 802.11b wireless LAN, cordless phones, and microwaves.

    The 5.8GHz Wireless A/V Sender transmits vivid video and hi-fi stereo sound wirelessly from a VCR, TV set, DVD player, satellite receiver or cable set-top box to any TV or monitor attached to the 5.8GHz Receiver. It can also be used in conjunction with a camcorder or CCD camera to turn into a wireless security monitoring system. The signal can go up to 300 feet with clear line of sight, and since it uses radio waves, it will even penetrate walls.

    All power supplies and connecting cords are included. Directional antennas minimize multi-path and interference.


    AraneusUSA Product No.:


    6" x 4" x 1.5"

    300 feet line of sight

    Signals Supported:
    PAL or NTSC TV

    RF Input Range:
    5725 ~ 5825 MHz


    Channel Low Frequency:
    Channel 1: 5745 MHz; channel 2: 5765 MHz; channel 3: 5785 MHz; channel 4: 5805 MHz

    Frequency Stability:
    200 KHz

    Input Level at Connector:
    -25 ~ -80 dBm

    Input Impedance:
    50 ohms

    Image Rejection:
    30 dB

    IF Frequency:
    479.5 MHz

    IF Bandwidth:
    18 MHz

    Tuning Algorithm:
    Heterodyne with low side lo PLL frequency synthesizer

    Video Devlation Bandwidth:
    6.4 MHz p-p

    DC Power Input:
    12 ~ 16 VDC

    Current Consumption:

    Video Output:
    CCIR 1 V p-p @ 75 ohms, de-emphasis CCIR

    Audio Output (L&R):
    1.45 V p-p @ 600 ohms, 75 us de-emphasis

    RF Output:
    CCIR CH36

    VTTS Noise Level:
    < -60 dBm (75 ohm 1 Vpp@ 5 meters)

    Audio S/N:
    30 dB (600 ohm 2 Vpp@ 5 meters)

    Jack Color:
    Video: yellow; audio: white (left), red (right)

    Operating Temperature:
    32 F to 122 F (0 C to 50 C), 85% RH indoor use only

    Storage Temperature:
    -4 F to 158 F (-20 C to 70 C) 90% RH

    FCC and CE certified

  • 5.8GHz wireless A/V transmitter with a built-in IR transmitter/UHF receiver

  • Power adapter

  • RCA cable

  • Instructions