The MemoCam Plus is a Covert Digital Video Recorder with removable memory card, camera, PIR and video motion detection (VMD)

Internal 60 degree angle B&W CCD Camera
Superb 420 TV line quality
Records images to its own memory card (3 images per second to 5 images per minute). Memory card can then be downloaded onto your PC
Video motion detection + PIR recording
Images are stored as tamper proof EVT files, allowing submission as evidence
2 Video inputs for additional external cameras
1 Video output for real time monitoring
Stores up to 20000 B/W images on MultiMedia Card (128MB)
Allows pre-defined recording times
Easy to install and user friendly
View and playback of recorded video images
Remote Control unit

The MemoCam Plus automatically records events on the Memory Card following an alarm. The alarm can be activated by external triggers and/or by the internal VMD and/or PIR detector.

The VMD + PIR dual detection technology, significantly increases the reliability of the motion detection, thus reducing false alarms.

The VMD enables the user to define specific areas of interest within the picture frame.

The recorded events are easily analyzed by simply removing the Memory Card from the unit and inserting it into a Memory Card Reader connected to a PC.

The remote control unit enables the user to Arm/Disarm the event recording process or record events manually.

Adding 2 external cameras, converts the unit into a multiple camera CCTV system, significantly reducing the cost per video input.

The Video Output enables the user to view live video from a selected camera when connected to a CCTV monitor.

This feature simplifies the camera adjustment process and provides additional monitoring capability

The built-in weekly Scheduler enables the user to automatically Arm/Disarm the system at predefined times and days

Simple automatic setup on the Memory Card defines the: image quality mode, camera visual parameters, frame rate and number of frames per event

There are 2 recording modes: Fixed - Records events until the MemoryCard is full
Cyclic - Records events successively, overriding old data when the Memory Card is full

Image Integrity - each image is digitally signed and can be authenticated

The fully functional PIR can be connected to an external control panel

The 3 color-coded LEDs indicate the status of the unit

3 Dry Contact Inputs for external triggers

2 Relay Outputs

JPEG Compression Format

4 recording qualities - Good, great, better, best

Image size = 5-20KB per image

Current Consumption = 450 - 500mA per hour

Unit dimensions(mm) = 67 x 135 x 56 (W xH x D)

Weight = 250g

Minimum System Requirements:

Pentium II - 200Mhz
16MB RAM
Super VGA or higher graphics card
Windows 95, 98, 2000, ME, NT or XP

See all MemoCam products

See all SpyCam products