Know When Someone's Approaching Your Home or Business!
 
  • Wireless motion sensor
  • Transmits Radio Frequency up to 1,000 ft.
  • Can be integrated into alarm or other systems
  • Optional accessories available for wireless doorbell or keyless entry Simply place the weatherproof PIR Motion Sensor alongside the entrances to your home. When a vehicle or person crosses the sensor's path, the sensor sends a signal to the indoor remote Chimebox Relay. A Single Relay Receiver is also available to wire into your alarm system (no chime).

    Get the Starter Kit
    The basic starter kit, 7135AS, is ideal for getting started monitoring your home or business. It includes one battery powered sensor and a chime receiver. The receiver can be expanded to monitor up to three sensors or get a second receiver later so you'll hear the chime when a sensor detects motion. The kit also includes mounting screws for the sensors and chime receivers plus an AC adapter to power the receiver. You'll only need a 9-volt battery for the sensor. (Hint, the 9820L9V Lithium battery will last about 5 times longer than an ordinary alkaline cell.)

    7135CR Chimebox w/Relay Specifications:

    Power Source:
    DC 9V (AC adapter included)

    Power Consumption:
    Standby: 1W, Operating: 2W

    Chime Tone:
    3 tone & 1 alarm (optional)

    Volume:
    Adjustable: 0~80dB / 5 levels (Continuous zone max.)

    Relay Output:
    Max. 1A / 50 VAC or 1A / 24VDC

    Output Timer:
    Selectable: off/1/5/30/60sec/utility output mode

    Status Indicator:
    Power Indicator - Green LED, Zone Indicator - Red LED x 3

    Radio Frequency:
    418mHz

    Operating Temperature:
    15F ~ 104F (-10C ~ 40C)

    Installation Location:
    Indoor

    Weight:
    6.0 oz. (170g)

    Accessories:
    1 AC adapter, 1 Mounting Screw

    7135SR Single Relay Receiver Specifications:

    Power Source:
    12 ~ 24V AC/DC (not included)

    Power Consumption:
    Standby: 30mA, Operating 80mA

    Relay Output:
    Max. 1A / 50 VAC or 1A / 24VDC

    Output Timer:
    Selectable: 1/5/30/60sec

    Status Indicator:
    Power Indicator - Green LED, Zone Indicator - Red LED x 3

    Radio Frequency:
    418mHz

    Operating Temperature:
    15F ~ 104F (-10C ~ 40C)

    Installation Location:
    Indoor

    Weight:
    4.2 oz. (120g)

    Accessories:
    1 Mounting Screw

    7135ST Wireless Motion Sensor/Transmitter

    Detection Method:
    Passive Infrared

    Detection Pattern:
    50ft (15m) long range, 17ft (5m) fan pattern

    Angle Adjustment:
    90 vertically & 5 horizonally or 5 vertically & 90 horizonally

    Power Source:
    9V: alkaline battery

    Battery Life:
    Approx. 2 years [250 / day at 70F (20C)]

    Status Indicator:
    Red LED

    Radio Frequency:
    418mHz

    Operating Temperature:
    15F ~ 120F (-10C ~ 50C)

    Water Resistance:
    IP54 (Complete protection against contact with live or moving parts. Protection against harmful deposits of dust. Protection against splashing from any direction.)

    Installation Location:
    Outdoor / Indoor

    Weight:
    6.3 oz. (180g)

    Accessories:
    2 Mounting Screws



  •